Go Fast Parts Acquired

Well, this is the year of the new, performance-machined cylinder head and 2v carburetor.  We have gathered some parts.  Initially, we purchased a cylinder head off a 1980 Fairmont and then the following from Vintage Inlines:

We took the cylinder head to Dakota Engine in Jamestown and we have it back now, and so we’re getting closer (as this last weekend, we also purchased an Autolite 2100–thanks Jacob!).

The picture on the left shows how the mounting plate will fit on the head, which has now been machined opened and tapped so that the mounting plate can be mounted (to which the 2100 can then be mounted).  This is called the “conversion” method rather than simply using an “adaptor,” which is merely an adaptor allowing a 2 barrel carb to be mounted to the single barrel opening.  The result is that this will double the CFM of the engine.  The engine should be ready for that increase, too, as we have the larger valves that fit this head and we had a valve job done on them.  Additionally, we have high-ratio rockers (seen in the first picture above, on the right).  Tear down of the engine will commence next week.  This is be a long, slow project, and eventually, fabricating the throttle and kickdown linkages will be the real challenge.  Stay tuned for more!  This engine is about to get fun!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s